Your shopping cart is empty!
NMEA2000 Network Cabling
The NMEA2000® network comprises of a single trunk or backbone cable running through the length of the vessel with Tee Adaptors positioned where devices are to be attached to the network and a terminator at each end.
The trunk or backbone cable can be created by either using made up cables or cord sets that come in a range of lengths or by running bulk cable and using field installable connectors where Tee connectors are required.
Trunk cables come in two sizes, a larger “Mini” size which is rated to carry 8 Amps or a smaller “Micro” size which is rated to carry 4 Amps.
The “Mini” trunk cable uses 12mm diameter cable and 25mm diameter connectors. The “Micro” trunk cable uses 7.5mm diameter cable and 14.5mm diameter connectors. Both types of cable are available in 0.5, 1, 2, 5 and 10 metre lengths and as bulk cable.
Most installers are using the Micro size cable as this is much easier to handle and install.
PART NUMBER DESCRIPTION
3809 Micro Trunk/Drop Cable 0.2 Metre
3810 Micro Trunk/Drop Cable 0.5 Metre
3811 Micro Trunk/Drop Cable 1 Metre
3812 Micro Trunk/Drop Cable 2 Metre
3813 Micro Trunk/Drop Cable 3 Metre
3815 Micro Trunk/Drop Cable 5 Metre
3819 Micro Trunk/Drop Cable 10 Metre
3821 Micro Cable 100m Reel
3825 Micro Trunk/Drop Cable Male/Male 0.5 Metre
3826 Micro Trunk/Drop Female/Female 0.5 Metre
3827 Micro Trunk/Drop Cable Male/Female 90º 0.2 Metre
3828 Micro Trunk/Drop Cable Male – 90º Female 0.5 Metre
3829 Micro Trunk/Drop Cable Male – 90º Female 1 Metre
3847 Micro Trunk/Drop Cable Female – 90º Male 0.2 Metre
3848 Micro Trunk/Drop Cable Female – 90º Male 0.5 Metre
3849 Micro Trunk/Drop Cable Female – 90º Male 1 Metre
Datasheet
0 reviews / Write a review
Tags: dc power, cables, connectors, tee, termination, isolator, nmea2000, monitor