Bilge Detector/Switch 5303 (20 A)

The Oceanic Systems 5303 (20Amp) Bilge Detector Switch permits the bilge pump to be switched on in the presence of water.

This easy to install unit is composed of a resin-coated watertight casing with operation managed by a microcontroller. It has an advanced digital filter to distinguish the presence of water and an extended power supply range too. This unit has the option of being installed with a remote indication of operation status by led or remote control pane which will offer a signal if the bilge pump is on for a prolonged period of time, or a manual remote pump switch-on by button or remote control panel.

There is a switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. The 5302 has the ability to function over a wide range of environmental temperatures and is protected against excessive battery rundown.

 

  • Operation managed by microcontroller.
  • Advanced digital filter to distinguish the presence of water.
  • Extended power supply range.
  • Remote indication of operation status by led or remote control panel (optional).
  • Manual remote pump switch-on by button or remote control panel (optional).
  • Signal for prolonged bilge pump switch on (if led or remote control panel is installed).
  • Protection against excessive battery rundown.
  • Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat.
  • Functioning over a wide range of environmental temperatures.
  • Resin-coated watertight casing.
  • Easy installation

 

Datasheet 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Oceanic Systems Bilge Detector/Switch 5303 - 20 A

  • $251.23


Tags: dc power, voltage, current, battery, nmea2000, monitor, detector