RF25N Rudder feedback


Connectivity


N2K PGNs127245
NMEA 20001x CAN Micro-C port, 1 LEN


Electrical


Power Consumption, max.40mA (from CAN)
Power Consumption, typical40mA (from CAN)
Supply Voltage12-16V via CAN


Environment


Operating Temperature Range-25C to +55C (-13F to +131F)
Storage Temperature Range-30C to +70C (-22F to +158F)
Waterproof ratingIPx6


MFD


Compass Safe Distance - Metric, imperial0,5m (19,7")


Physical


Dimensions (W x H x D)99 x 65 x 177mm (3,90 x 2,56 x 6,97")
Mounting TypeHorizontal, Vertical, Upside-down
Weight0,5kg (1,1 lbs)


Other


Warranty Period2 years


Precision 9 Compass


Approvals


ComplianceCE under EMC directive 2014/30/EU


Connectivity


N2K PGNs127250, 127251, 127257, 127252
NMEA 20001x NMEA 20000 Micro-C port, 1 LEN


Electrical


Power Consumption, max.0,4W (N2K Load 1 len)
Supply Voltage12V DC (8-16V DC) via NMEA2000


Environment


Operating Temperature Range-25 to + 65ºC (-13 to + 149ºF)
Storage Temperature Range-30 to + 70ºC (-22 to + 158ºF)
Waterproof ratingIPx7


Heading Sensor


Accuracy+/-2deg. After calibration
Data AvailableMagnetic heading, rate of turn, pitch/roll, heave
TypeSolid state, rate stabilized


MFD


Compass Safe Distance - Metric, imperial500mm (1,7")


Physical


Dimensions (W x H x D)36 x 119 x 119mm (1,42 x 4,69 x 4,69")
Mounting TypeBracket, Bulkhead
Weight0,165kg + 0,130kg(bracket)


Other


Warranty Period2 Years


NAC-3


Autopilot


Compass sensor supportNMEA2000, NMEA0183
Drive output12/24VDC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)
Engine Drive systems integrationReversible pump/motor, Solenoid valve on/off
Rudder sensor supportRF300, RF45X, RF25N, RF70 & VRF


Connectivity


NMEA 0183 Sentences supportedInput: AAM, ACK, APB, BOD, BWC, DPT, GGA, GLL, HDG, HDT, HSC, RMA, RMB, RMC, ROT, THS, TNT, VBW, VHW, VLW, VTG, ZDA. Output: HDG (10Hz) or HDT (10Hz), RSA (5Hz)
NMEA 01831x Tx, 1x Rx NMEA0183 terminal, 4800, 9600, 19200 & 38400 Baud
NMEA 20001x CAN terminal, 1 LEN


Electrical


Power Consumption, max.750W
Power Consumption, typical100mA + Drive load
Recommended Fuse RatingInternal fuse 30A (Slow)
Supply Voltage12/24VDC +30 -10%


Environment


Operating Temperature Range-15 to +55C (5 to 131F)
Storage Temperature Range-30C to +70C (-22F to +158F)
Waterproof ratingIPx2


MFD


Compass Safe Distance - Metric, imperial0,5m (20 inches)


Physical


Dimensions (W x H x D)204 x 190 x 57mm (8,1 x 7,5 x 2,2")
Mounting TypeBulkhead
Weight0,7 kg (1,6 lbs)


Other


Warranty Period2 years



NAC-3 Core Pack – High Capacity

SKU: 000-13336-001

This pack includes all of the core components you need to upgrade your boat with a Continuum autopilot system, designed for rudder-steered vessels above 10 metres (35 feet) in length. Just add a drive unit to suit your steering system, and choose a dedicated autopilot controller or B&G/ Simrad multifunction display.

Key Features

  • Core autopilot system components – just add a drive unit and controller
  • Ideal for rudder-steered boats above 10 metres (35 feet) in length
  • Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
  • Take control with the B&G Triton2 controller, Triton2 display, Simrad AP44 Autopilot Controller, IS42 display and OP12 keypad, or a networked multifunction display
  • Easy setup with automatic tuning and compass calibration

Product details

NAC-3 Autopilot Core Pack

This pack includes the Simrad NAC-3 autopilot computer, RF25N rudder feedback unit, Precision-9 solid-state compass, plus all cabling and connectors required to build an NMEA 2000® network backbone or connect your autopilot system to an existing NMEA 2000® network. This pack is recommended for rudder-steered boats above 10 metres (35 feet) in length, and is suitable for use with high-current drive pumps including the B&G/ Simrad RPU160 and RPU300, mechanical drives such as the B&G/ Simrad DD15, hydraulic linear drives such as the HLD2000 or RAM series, and solenoid valves.

Multiple Control Options

Choose from a range of dedicated autopilot controllers, or control your autopilot from your existing B&G/ Simrad multifunction display. Install extra autopilot stations, ideal for dual-helm vessels, or add the B&G/ Simrad WR10 wireless remote for instant steering and autopilot control from anywhere on board.

Easy Installation and Setup

Industry-standard NMEA 2000® networking and NMEA 0183® input offer reliable connectivity to sensors, autopilot controllers, and multifunction displays located anywhere on board. Auto-tuning simplifies setup and ensures optimal steering performance, while automatic compass calibration continuously improves heading accuracy as you travel.

Minimum product requirements

Requires a hydraulic steering pump or mechanical drive unit, and a compatible autopilot controller or networked multifunction display.

What's in the box?

  • RF25N Rudder Reference Sensor with Micro-C connector
  • Micro-C Backbone Kit
  • Precision-9 Compass
  • NAC-3 Autopilot Computer

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

NAC-3 Core Pack - High Capacity

  • $3,265.00


Related Products

WR10 Wireless Autopilot Remote Control

WR10 Wireless Autopilot Remote Control

WR10 Wireless Autopilot Remote Control   Retro-fi..

$579.00

NAC-2 Core Pack - Medium Capacity

NAC-2 Core Pack - Medium Capacity

NAC-2 Core Pack SKU: 000-13335-001 This pack includes ..

$2,390.00

NAC-2 VRF Core Pack - Medium Capacity

NAC-2 VRF Core Pack - Medium Capacity

NAC-2 VRF Core Pack SKU: 000-13337-001 This pack inclu..

$2,175.00

NAC-3 VRF Core Pack - High Capacity

NAC-3 VRF Core Pack - High Capacity

NAC-3 VRF Core Pack SKU: 000-13338-001 This pack inclu..

$2,999.00

Tags: simrad, electronics, autopilot, compass, nmea, 2000, precision, 9, nac-3, micro-c, backbone, computer, kit, pack, sensor